Cecil IonQuest 3 Ion Chromatography System
Superb Performance Ion Chromatography
For more than 30 years Buck Scientific has enjoyed representing Cecil instruments in the USA. Cecil has been long known for their high quality instrumentation. The completely new Ion Chromatography system from Cecil Instruments, the IonQuest 3, is a top performance modular Ion Chromatography system. We have One demo unit in stock, Get 10% off & immediate delivery! email me for a quote. email@example.com - Eric Anderson
This system come complete with
The conductivity cell is enclosed with a heat exchanger in a precisely thermostatted enclosure. The temperature of the enclosure is controlled to better than ±0.01ºC. The working temperature may be set by the operator to be between 25ºC and 50ºC and set with a default value of 35ºC during production testing.
The system is easy to use by control panel operation, or by using the sophisticated Cecil PowerStream software for data acquisition, processing and reporting. Full system control is also provided by the workstation equipped with PowerStream. The modularity of the system enables its configuration to be changed with ease, for instance to use a UV/Visible detector. Modules may readily be replaced, to reduce down-time, should the need arise.
Precision Temperature Control
The eluent background conductivity changes by about 2% for a 1ºC change in temperature. The cell temperature controlled enclosure temperature may be set by the operator to avoid ambient changes causing drift. The default value is set at 35ºC and controlled to better than ±0.01ºC. Temperature compensation is not therefore required.
Pulse Free PumpMobile phase pumping is provided by a dual piston, digitally controlled, pump . Electronic feedback control virtually eliminates pulsing without using mechanical damping.
Column OvenThe very precisely temperature controlled oven accommodates Anion and Cation columns and pre-columns, as well as a background suppressor cartridge with its over pressure protection valve. Close coupling to the detector provides high stability, low noise and low dispersion.
A specially designed leak detection system is accommodated within the cell oven enclosure. The detection system may be used to shutdown the system if a leak is detected in the enclosure.
This software, developed by Cecil Instruments, provides system control and superb data processing, manipulation and reporting with truly unrivaled ease.
PowerStream is a chromatography management system developed by Cecil Instruments. Comprehensive data processing and full control of Cecil HPLC modules is provided. PowerStream complies with the terms of 21 CFR part 11.
PowerStream is easy to use, with a fully interactive graphical interface and display providing full method development with customised parameters, data capture and manipulation of data and chromatograms. A tutorial is included for clarity and rapid learning.
The complete range of chromatographic applications may be undertaken. Pumps may be fully programmed for any required gradient and the gradient profile may be overlayed on stored chromatograms for accurate mixture or flow adjustments. Mid elution wavelength control of the programmable UV detector is provided. Calibration curves, using any number of standards, may be computed and plotted for each component of interest and may subsequently be used to determine the concentration of unknown samples.
For more information click here.
Detector Advanced Design
The CE4710 Conductivity Detector is an entirely new design from Cecil Instruments providing performance of the very highest order due to its exceptionally low noise and unrivalled baseline stability. To achieve this standard of performance a very low volume, 0.5µL, conductivity cell has been designed and is operated in a precisely thermostatted aluminium oven enclosure. A specially designed, low dispersion, heat exchanger, is also mounted in the cell enclosure preceding the detector cell. The exchanger stabilises the temperature of the mobile phase entering the cell. With the enclosed system controlled to better than ±0.01ºC superb performance is always available. Autozero and auto-range facilities are provided to ensure convenience of operation. Built-in diagnostics aids instrument evaluation and fault finding. The temperature controlled cell and heat exchanger enclosure is conveniently accessed from the side of the detector module, as shown in the photograph.
Chemically Suppressed Solvent Background
Sensitivity for the measurement of anions is greatly improved by reducing the conductivity of the eluent post column. An optional Anion Membrane Suppressor - SAMS - is available which is mounted in the column oven, in series with and after the analytical column. The suppressor may be used continuously and is regenerated by a Continuous Anion Regeneration System - CARS, which pumps the regeneration fluid through the post column suppressor cartridge. The suppressed solvent background conductivity leads to reduced drift and noise and therefore higher sensitivity for measurements is available.
Close Coupling to OvenClose coupling of the detector to the oven is important in eliminating the effects of ambient temperature fluctuation on results. The couplers can be seen on the side of the detector. The cell compartment thermostatted enclosure is shown in the lower photograph, with the side cover removed for easy access.
Pump-Proven PerformanceThe Cecil CE4100 dual piston solvent delivery pump is well established as very reliable, convenient to use, with a very high performance specification. The microprocessor controlled pump uses a precise stepping motor drive for the dual overlapping pistons
which deliver solvent with very little pulsing.
Electronic feedback is used to control the pump speed during its cycle to reduce pulsing to a negligible level. No further mechanical pulse damping is required. Delivery of mobile phase in the range 0.2 - 2.5mL per minute, the usually used range, is well within the ability of the pump, which delivers in the range 0.001mL/min to 10mL/min. The wetted components of the pump are, sapphire, ruby and ceramic inserts.
The Total I C Concept
Convenient Column OvenIt is important that the separation columns should operate at a constant temperature, matching the temperature of the measuring cell. The CE4601C column oven module is a very convenient front opening design accommodating two analytical columns and precolumns and also, when needed, a mobile phase background conductivity suppressor cartridge and its over-pressure protection valve.
The oven operates over the range from ambient temperature +5ºC to 85ºC. The default temperature is set at 35ºC.
The actual and set temperatures are displayed by a bright LCD display and may be controlled by the adjacent keypad, or set by the PowerStream software. Temperature stability is better than ±0.01ºC.
The flow tubes from the columns and suppressor cartridge enter and leave the oven enclosure through convenient self-sealing ports. The output port to the cell thermostatted enclosure lines up with the input connector of the enclosure, when the modular system is arranged as shown in the photographs of the system.
The very close coupling to the detector cell leaves only about 2 centimetres of tube between the oven and the cell. With the cell and oven operated at the same temperature, say 35ºC, drift or noise due to ambient fluctuations is eliminated.A column switching valve may be fitted to the oven offering convenient operation.
All the data processing procedures and power you need are elegantly available in PowerStream software. Digital system control is also available.
A typical display is shown below of a waste water cation analysis with a superimposed portion of the chromatogram highlighting sodium. Detail and clarity are excellent and the software is truly both easy to use and sophisticated.
A fully interactive graphical interface provides for full method development, data capture and display of chromatograms for live screen display during a run. Developed to operate with Windows XP and VISTA, it may also be used with Windows 2000.
|• HPLC system with isocratic pump (0.001 to 10 mL/min in 0.001 steps)|
|• 5800 PSI Max Pressure, digital flow control, <0.1% RSD|
|• Conductivity Detector w/ 0.5ul thermostatted cell|
|• Rheodyne Valve w/ 20ul Loop|
|• Column Oven - Ambient to 80C (3 column capacity)|
|• PowerStream Chromatography Software|
|• Complete Installation Kit|
|anion suppression accessory|
|IonQuest C3||Automatic Isocratic IC System w/ Suppressed Conductivity Detector||$28,970.00|
|• Same as IonQuest C2 with 50 Position Autosampler|
Share this Product
Questions & Answers
Have a Question?
Be the first to ask a question about this.